Metals: (800) 292-0268
Plastic Thermoforming | Thermoforming Sheets
Valley Enterprises specializes in the process of Plastic Thermoforming in which a of single sheet thermoplastic material is heated and formed utilizing negative air pressure (vacuum) to form various products including water shields, consumer packaging, and headliner stiffeners.
During the plastic thermoforming process, a heated sheet of plastic material is placed over a mold which is then moved towards the sheet and presses against it to create a seal. Next, the application of a vacuum draws out the air between the mold and the sheet so the plastic conforms to the mold exactly. Once the curing temperature is reached and the piece is formed, air is blown back into the mold separating the new part from the mold.
Advantages of Plastic Thermoforming
Low Tooling Costs │ because of the low forming pressure used in the plastic thermoforming process, tools can be made from relatively inexpensive material
Efficient prototyping │ low tooling cost also allows prototyping to be accomplished very quickly and inexpensively – we can create a prototype tool for you in less than 24 hours if needed
Ideal for Large Parts │ because tooling costs are low, plastic thermoforming is an ideal process for small to medium production runs of large parts
Molding Process Selection